Dampfix Kits

Damp Proof Membrane Kits for Walls and Floors

Property Repair Systems is OPEN FOR BUSINESS - 01626 872886

Where you can talk to real people

 

 

 

       

Guideline Prices for typical wall and floor Membrane kits - free help and precise costing - 01626 872886

You can specify any length or area of any product.

TYPES OF KIT - listed by wall and floor type

1. Concrete floors - must be flat - Slimline for direct carpeting or boarding on smooth concrete or screed - 2mm thick - click

Only 2mm thick, for damp floor covering, ready to directly  lay carpet

2. Concrete, sand 'blinded' hardcore or compacted earth floors - concrete, screed or board directly onto the membrane - 8mm thick - click

Tough, easy to join Kontract Membrane is ideal under concrete, or used on top of damp concrete floors ready for boarding

3. Brick walls, block walls and drillable stone walls - plaster directly on the membrane - 8mm thick membrane - click

Mesh Membrane ready for plastering in minutes - permanent damp wall protection.

4. Brick walls and uniform block or drillable stone walls - must be flat - fix plasterboard directly to the membrane with 'dabs' of adhesive - 8mm thick membrane - click

Mesh Membrane ready for plastering in minutes - permanent damp wall protection.

5. Brick walls, block walls and drillable stone walls - plaster directly on the membrane - 3mm thick membrane - click

Slimline wall membrane - easy to plaster or plasterboard

6. Brick walls and uniform block or drillable stone walls - must be flat - fix plasterboard directly to the membrane with 'dabs' of adhesive - 3mm thick membrane - click

Slimline wall membrane - easy to plaster or plasterboard

7. Brick walls and uniform block or drillable stone walls - must be flat - fix plasterboard onto wooden battens screwed to the hollow plug heads - 8mm thick membrane - click - or for rough walls use without plugs and battens, fixing via an inner stud frame.

Kontract Membrane  takes battens , insulation  and plasterboard. Fast fix for a much warmer wall.

(Note - with Type 7 Kits you can easily fit low cost insulation between the battens, before fixing your boards, for even greater warmth)


1. For flooring - direct lay to smooth, flat concrete or screed - Slimline Floorseal Membrane (only 2mm thick)

Kit Specification - roll width 1metre, includes single sided fibre faced jointing tape, for butt joints, to leave ultra smooth joins for direct carpeting if desired.

Only 2mm thick, for damp floor covering, ready to directly  lay carpet

Full rolls 2 metres wide are also available.

Click the Button to Buy or call 01626 872886 for free help.

You can ask for any length or area to be cut for you - these are just examples.

6 square metres - £62.13 plus VAT -

10 square metres - £96.88 plus VAT -

15 square metres - £140.32 plus VAT -

Kits include tape for butt jointing. Allow in your area calculation for a turn up around the walls, to protect your flooring material edge from wall contact. You can either lay timber boarding panels first, or just underlay (thick felt type recommended) and then carpet directly to the membrane.

Click for Site Home Page

Click to go to the top of this page


2. For flooring - direct lay to smooth concrete, screed, sand blinded hardcore or well compacted earth - Kontract Membrane (8mm thick)

Kit Specification - roll width 1 metre, includes mastic rope or double sided jointing tape, for overlapping joints.

Tough, easy to join Kontract Membrane is ideal under concrete, or used on top of damp concrete floors ready for boarding

Full rolls 2 metres wide are also available.

Click the Button to Buy or call 01626 872886 for free help.

You can ask for any length or area to be cut for you - these are just examples.

6 square metres - £45.95 plus VAT -

10 square metres - £73.19 plus VAT -

15 square metres - £106.21 plus VAT -

Kits include tape for overlapping jointing. Allow for a turn up around the walls, to protect your floor edge from wall contact. You can either lay timber boarding panels, or concrete/screed directly to the membrane.

Click for Site Home Page

Click to go to the top of this page


3. For brick walls, block walls and drillable stone walls - directly plaster onto the membrane - Mesh Membrane (only 8mm thick)

Kit Specification - roll width 1 metre, includes 25 plugs per square metre, plug sealing mastic rope, double sided membrane jointing tape (not included in the 6 square metre kit) for overlapping joints.

Mesh Membrane ready for plastering in minutes - permanent damp wall protection.

Full rolls 2 metres wide are also available.

Click the Button to Buy or call 01626 872886 for free help.

You can ask for any length or area to be cut for you - these are just examples.

6 square metres - £98.92 plus VAT -

10 square metres - £161.47 plus VAT -

15 square metres - £227.38 plus VAT -

Use Bonding type plaster, then a skim finish - plastering adds a minimum of 12mm to the thickness of the membrane. If you need less thickness use our Slimline Mesh Membrane (see below).

Click for Site Home Page

Click to go to the top of this page


4. For flat brick, block or uniform stone walls - plasterboard on adhesive 'dabs' directly onto the membrane - Mesh Membrane (only 8mm thick)

Kit Specification - roll width 1 metre, includes 15 plugs per square metre, plug sealing mastic rope, double sided membrane jointing tape (not included in the 6 square metre kit), for overlapping joints.

Mesh Membrane ready for plastering in minutes - permanent damp wall protection.

Full rolls 2 metres wide are also available.

Click the Button to Buy or call 01626 872886 for free help.

You can ask for any length or area to be cut for you - these are just examples.

6 square metres - £89.98 plus VAT -

10 square metres - £144.92 plus VAT -

15 square metres - £205.04 plus VAT -

Use skim plaster finish on the taped joint (12.5mm thick) plasterboard - adds a minimum of 15 mm to the thickness of the membrane. If you need less thickness (to blend in with existing plaster) use our Slimline Mesh Membrane (see below).

Click for Site Home Page

Click to go to the top of this page


5. For brick walls, block walls and drillable stone walls - directly plaster onto the membrane - Slimline Mesh Membrane (only 3mm thick)

Kit Specification - roll widths of 1 metre, includes 25 plugs per square metre, plug sealing mastic rope and single sided fibre faced jointing tape for butt joints.

Slimline wall membrane - easy to plaster or plasterboard

Full rolls 2 metres wide are also available.

Click the Button to Buy or call 01626 872886 for free help.

You can ask for any length or area to be cut for you - these are just examples.

6 square metres - £90.95 plus VAT -

10 square metres - £148.18 plus VAT -

15 square metres - £207.46 plus VAT -

 

Use Bonding type plaster, then a skim finish - adds a minimum of 12mm to the thickness of the membrane. If you need more thickness (to blend with existing plaster) use our 8mm Mesh Membrane (see above).

Click for Site Home Page

Click to go to the top of this page


6. For flat brick, uniform block or drillable stone walls - plasterboard on adhesive 'dabs' directly onto the membrane - Slimline Mesh Membrane (only 3mm thick)

Kit Specification - roll widths of 1 metre, includes 15 plugs per square metre, plug sealing mastic rope and single sided fibre faced jointing tape for butt joints.

Slimline wall membrane - easy to plaster or plasterboard

Full rolls 2 metres wide are also available.

Click the Button to Buy or call 01626 872886 for free help.

You can ask for any length or area to be cut for you - these are just examples.

6 square metres - £82.01 plus VAT -

10 square metres - £123.47 plus VAT -

15 square metres - £185.12 plus VAT -

Use skim plaster finish on the taped joint (12.5mm thick) plasterboard - adds a minimum of 15 mm to the thickness of the membrane. If you need more thickness (to blend in with existing plaster) use our 8mm thick Mesh Membrane (see above).

Click for Site Home Page

Click to go to the top of this page


7. For flat brick, block or stone walls - fit plasterboard over insulation between wooden battens - Kontract Membrane (8mm thick) or use a wooden 'stud' frame to hold the membrane against the wall.

Kit Specification - roll width 1 metre, includes plugs, plug seals, double sided membrane jointing tape, for overlapping joints.

Kontract Membrane  takes battens , insulation  and plasterboard. Fast fix for a much warmer wall.

Full rolls 2 metres wide are also available.

Click the Button to Buy or call 01626 872886 for free help.

You can ask for any length or area to be cut for you - these are just examples.

6 square metres - £62.49 plus VAT -

10 square metres - £100.76 plus VAT -

15 square metres - £147.57 plus VAT -

Use standard 9mm or 12.5mm plasterboard, then a skim finish - adds a minimum of 15mm to the thickness of the membrane, plus the wooden batten - the battens should equal your insulation thickness - say 1 inch (25mm) - they screw onto the hollow plug heads.

Click for Site Home Page

Click to go to the top of this page


Other Links that might interest you:

DIY Fitting detail - Click here to see Membrane Fitting Method, step by step.

DIY Demo - Click here to see Andrew lining his own Cellars

Diagnosis - Click here to find out why you have Damp

Water Leak? - Click here to see Tests to carry out if you have liquid water, rather than damp


Click to go to the Membrane Shop to see example prices and more product details

Call us on 01626 872886 for help and Project Mentoring.


Why are our Membrane Kits so different?

1. Because we supply Membrane Waterproofing Kits priced by the Square Metre - you only buy exactly what you need.

2. We offer Free Project Mentoring - all the help and advice you need.

3. We assemble your chosen area of Membrane, quantities of plugs and seals, tape and mastic, to provide you with exactly the Kit you need for your Project - no need to waste money on complete rolls or full boxes - just give us the wall and floor areas or dimensions and we will give you the most competitive price for your exact needs.


What does Damproofing Membrane look like?

There are several types, for different purposes:

Kontract Membrane, for walls and floors, to take battensMesh Membrane with plug, to take plaster or plasterboard on dabs of adhesiveSlimline Floorseal - to take underlay then carpet or flooring

Kontract Membrane - for Battens, Mesh membrane - for plaster, Slimline Floor - for carpet.


Damp Proofing Membrane Installation Tips

We have answered all the common questions in the form of a Membrane Tips Sheet.

Click here for Mesh Membrane Tips - for plastering or plasterboard on adhesive 'dabs'

Click here for Kontract Membrane Tips - for insulating, battens and plasterboard.

Click for Site Home Page


Membrane | Privacy Policy | Returns Policy | Contact


Property Repair Systems

T: 01626 872886

E: help@propertyrepairsystems.co.uk


Use any of our Shopping Pages to place goods in your Shopping Cart - they all use the same Shopping Cart system.

Click to view your Shopping Cart

or continue shopping by clicking on our Membrane Shop link below.

MEMBRANES PRODUCTS SHOP


Other Property Repair Systems Sites:

www.epoxy-info.co.uk - epoxy resins for repairing wood, concrete, brick and stone

www.fire-door-paint.co.uk - upgrade doors to 30 minutes fire resistance

www.joist-repair.co.uk - how to quickly repair joists and beams of any size

www.propertyrepairsystems.co.uk - our Home Site

www.steel-fire-paint.co.uk - treat steel with Intumescent Paint to provide fire protection

www.timber.org.uk - systems of repair, with step by step methods

www.timber-repair.co.uk - how to repair timber beams


Site written by: David Moore

David Moore, B.A. (Hons.), C.T.I.S., C.R.D.S. Technical Author

Google+